VELUX VS S01 Manual Opening Skylight 1140 × 700mm
Original price was: $1,633.85.$1,356.10Current price is: $1,356.10.
The VELUX VS S01 is the wide, shallow VS format for broad daylight and manual ventilation, measuring 1140 × 700mm with approximately 997 × 519mm of internal glass, 0.52m² daylight area and 0.68m² ventilation area. It includes a removable insect screen and operating hook; choose the ZZZ 201 winder handle for within-reach use, ZOZ 032 short rod when just out of reach, or ZCT 300 telescopic rod for higher installations. VELUX lists the product at approximately 35.9kg including flashing. Ideal for wide hallways, kitchens, living rooms, dining zones, bedrooms, with EDW or roof-specific custom flashing selected to suit the actual tile or metal roof.
✔ Velux Supply & install ✔ Custom flashing ✔ Noble Park Pickup & Melbourne Delivery ✔ 2026 Cost Guide ✔ Custom Flashing Guide
VELUX VS S01 Manual Opening Skylight – 1140 × 700mm
The VELUX VS S01 is the wide, shallow VS format for broad daylight and manual ventilation. With approximately 997 × 519mm of internal glass, 0.52m² daylight area and 0.68m² ventilation area, it is designed for pitched-roof rooms where you want both natural light and simple, non-powered airflow.
Why Choose VS S01?
A wide horizontal sky view rather than the tall narrow effect of the c-series.
Rooms It Can Suit
- Wide Hallways
- Kitchens
- Living Rooms
- Dining Zones
- Bedrooms
- Feature Ceilings
- Open-Plan Spaces
Why Choose VS?
- Daylight plus real natural ventilation
- Lower purchase cost than powered VSE/VSS
- No motor, battery or power point required
- Removable insect screen included
- Simple control options for different ceiling heights
How Will You Open VS S01?
The VS operating hook is included, but the manual control is selected separately. This is an important conversion decision because the finished plaster shaft and ceiling height determine how comfortable the skylight is to use.
Within reach. Replaces the operating hook and gives direct hand winding for a VS skylight that can be comfortably reached.
Just out of reach. A 60cm short control rod for situations where the skylight is slightly too high for direct hand operation.
Higher installations. Adjustable from approximately 145–285cm and attaches to the supplied operating hook.
Which Flashing Should You Use With VS S01?
Flashing is sold separately. VELUX offers factory flashing for common pitched-roof materials, while Central Skylights custom Colorbond flashing covers profiles such as TrimDeck and Klip-Lok and selected low-pitch raised configurations.
- EDW: compatible tiled roofs and low-profile metal such as corrugated iron / Spandek
- EDL: slate or shingle roofs, typically 4–8mm thick
- EKW: combination flashing for multiple skylights, 100mm spacing, for EDW-compatible roof types
- EDW is not for wide-span profiles such as TrimDeck or Klip-Lok
- Corrugated custom applications
- TrimDeck
- Klip-Lok
- Prefabricated or Flat Pack
- Colorbond colour and backflash options
- Raised-to-15° configuration for suitable sub-15° projects
Pitched-Roof Flashing & Installation Examples
These genuine Central Skylights images show real pitched-roof integration and drainage details. The first example is an FS fixed skylight rather than VS S01; it is used to illustrate the shared VELUX EDW/tile-roof flashing principle without mislabelling the model.



Final flashing, shaft and control details depend on the actual VS model, roof material, roof pitch and finished ceiling height.
Not sure whether VS S01 is the right size or control?
Send roof, room and ceiling photos. We can help check size, manual reach, roof profile, flashing and whether fixed, manual, electric or solar opening is the better buy.
About VELUX VS S01
VS S01 is for pitched-roof rooms where daylight and natural ventilation are both useful but powered remote operation is unnecessary. A wide horizontal sky view rather than the tall narrow effect of the c-series.
VELUX Australia lists VS with high-performance double glazing, approximately 80% radiant heat block for the complete skylight, approximately 99% UV block, U-value 2.50, SHGC 0.21 and a 32dB acoustic performance figure.
Choose VS When
- You want daylight and ventilation
- Manual control is practical
- You want a simpler/lower-cost opening model
- No powered rain sensor is required
Consider Another Model When
- FS if you only need daylight
- VSS for remote solar operation and rain sensor
- VSE for electric remote operation and rain sensor
- A different VS size if room or framing proportions fit better
VS S01 Size, Daylight & Ventilation
| Model | VELUX VS S01 |
|---|---|
| Overall frame | 1140 × 700mm |
| Internal glass | 997 × 519mm |
| Daylight area | 0.52m² |
| Ventilation area | 0.68m² |
| VELUX listed weight | 35.9kg including flashing |
| Profile height above batten | 130mm |
Manual Control Options for VS S01
ZZZ 201
Within-reach winder handle. Replaces the supplied operating hook.
ZOZ 032
60cm short control rod for a VS that is only slightly out of reach.
ZCT 300
Telescopic rod adjustable approximately 145–285cm and used with the operating hook.
Roof Types & Flashing Options
| Roof / layout | Typical flashing direction |
|---|---|
| Tile or compatible low-profile corrugated · 15°+ | VELUX EDW S01 |
| Slate / shingle · typically 4–8mm | VELUX EDL system |
| Multiple skylights | VELUX EKW combination system where applicable; VELUX specifies 100mm spacing |
| TrimDeck / Klip-Lok | Central roof-profile-specific custom flashing |
| Below 15° | Raise skylight to at least 15° and custom flash after project assessment |
Roof Framing, Shaft & Installation Planning
Overall product size is not the same as the required framed opening. Confirm rafter/truss spacing, structural member widths, roof battens, services and the finished plaster shaft before cutting.
- Check actual rafter/truss spacing
- Do not assume nominal centres equal a clear opening
- Do not cut structural trusses without proper design
- Plan the shaft around manual control reach
- Confirm roof profile and flashing before ordering
- Consider opening restrictor requirements for within-reach units
VS S01 Specifications & 5 Buying FAQs
| Model | VELUX VS S01 |
|---|---|
| Type | Manual-opening pitched-roof skylight |
| Overall size | 1140 × 700mm |
| Internal glass | 997 × 519mm |
| Daylight area | 0.52m² |
| Ventilation area | 0.68m² |
| Weight | 35.9kg including flashing (VELUX data-sheet footnote) |
| Roof pitch | 15°–90° normal installation range |
| Glazing | High-performance double glazing; toughened outer pane, argon cavity, laminated inner pane, Low-E³ and NEAT™ coating |
| Heat / UV | Approx. 80% radiant heat block complete skylight; approx. 99% harmful UV block |
| Included | Removable insect screen and operating hook |
| Controls | ZZZ 201 / ZOZ 032 / ZCT 300 sold separately |
| Blinds | FSCH Solar Honeycomb Blackout and FSLH Solar Translucent compatible |
| Bushfire | VELUX lists BAL 40 assessment in closed position for applicable 18°–75° installations; custom-made flashing / aperture protection requirements and local compliance must be confirmed |
1. How do I open the VELUX VS S01?
Use ZZZ 201 when the skylight is within reach, ZOZ 032 when it is just out of reach, or ZCT 300 for higher installations. The operating hook is supplied with the VS; the manual controls are sold separately.
2. Does VS S01 have a rain sensor?
No. VS is a manual-opening skylight and does not automatically close if rain starts. Choose VSS S01 or VSE S01 if automatic rain closing is important.
3. What flashing do I need for VS S01?
Use the flashing that matches the actual roof. EDW suits compatible tile and low-profile corrugated roofs; EDL is for slate/shingle; EKW is a combination system for suitable multiple-skylight layouts; TrimDeck/Klip-Lok and selected special situations need roof-specific custom flashing.
4. How heavy is VS S01?
VELUX lists VS S01 at approximately 35.9kg, with the product data-sheet footnote stating that this weight includes flashing. Use that figure when planning delivery and roof handling.
5. Should I choose FS S01, VS S01, VSE S01 or VSS S01?
Choose FS S01 for fixed daylight, VS S01 for manual ventilation, VSE S01 for electric remote ventilation with rain sensor, or VSS S01 for solar remote ventilation with rain sensor.
FS vs VS vs VSE vs VSS S01
The same nominal size can serve very different buyers. Compare operation before the roof opening and flashing are committed.
Compare Nearby VS Sizes
Compare daylight, ventilation, weight and room proportions before finalising the skylight and flashing.
Add an FSCH or FSLH Solar Blind to VS S01
Both blind families are designed for VS/VSE/VSS skylights and use their own solar power and wireless keypad, so adding a solar blind does not turn the manual VS skylight itself into a powered opening skylight.
View VS / VSE / VSS Blinds →Choose the Blind by Room
- FSCH Honeycomb: stronger room darkening and heat reduction
- FSLH Translucent: softer filtered daylight and glare reduction
- Useful in bedrooms, bathrooms, kitchens and media spaces
Manual Skylight + Correct Control + Flashing + Optional Blind
Central Skylights supplies genuine VELUX VS skylights, EDW and custom Colorbond flashing, manual controls and compatible FSCH/FSLH solar blinds for homeowners, roofers, builders and renovators.

Basil Marcus –
Absolutely adore the brightness they bring in!
Amory Robert –
Very good, thanks Central Skylights
Basil –
Simple to install and visually appealing. It’s the only horizontally opening skylight I’ve come across on the market at an affordable price. The customer support is exceptional.
Hubert –
Thanks full Central Skylights
Farrer W –
It took me quite a long time to place my order. They didn’t seem to understand me very well.
Baldric J –
Great job, I love so
Anatole B –
Good product! quick ship
Leonard A –
Good service, I will buy from this company again