Additional Information
| Roof Types | Corrugated 0-15 Degrees, Corrugated 15+ Degrees, TrimDeck 0-15 Degrees, TrimDeck 15+ Degrees, Kliplok 0-15 Degrees, Kliplok 15+ Degrees |
|---|
Sale!
Melbourne-made custom VELUX flashing
VELUX supply + matching flashing
✔ VELUX Supply & Install ✔ Custom Flashing ✔ Noble Park Pickup & Melbourne Delivery ✔ 2026 Cost Guide ✔ Custom Flashing Guide
VELUX S01 Custom Colorbond Flashing – 1140 x 700 mm
Price range: $368.90 through $470.74
Custom-made Colorbond flashing for VELUX S01 1140 × 700mm skylights, including FS, VS, VSE and VSS models. Made in Melbourne for Corrugated, TrimDeck and Klip-Lok roofs, with Prefabricated or Flat Pack options, low-pitch configurations and backflash available. Ideal for roofers, builders, renovators and homeowners looking for a made-to-fit flashing solution.
Custom Colorbond Flashing for VELUX S01 1140 × 700mm
Purpose-made for compatible VELUX FS, VS, VSE and VSS S01 pitched-roof skylights. Choose a roof-specific configuration for Corrugated, TrimDeck or Klip-Lok roofing, supplied either Prefabricated or as a Flat Pack for on-site assembly by your installer.
S01 · 1140 × 700mm Prefabricated or Flat Pack Corrugated · TrimDeck · Klip-Lok Colorbond colour options Low-pitch configurations Backflash available
Made for S01Matched to the VELUX S01 1140 × 700mm size.
Compatible ModelsFS S01, VS S01, VSE S01, VSS S01
Two Supply FormatsChoose Prefabricated or Flat Pack to suit your installer and project.
Melbourne MadeCustom manufactured with Noble Park pickup and Melbourne delivery available.
Buy the matching skylight
This Flashing Suits These VELUX S01 Skylights
This flashing is made for compatible VELUX FS, VS, VSE and VSS S01 pitched-roof skylights in the 1140 × 700mm size. Choose the skylight model that matches the room's daylight and ventilation requirements.
FS S01 · 1140 × 700mm VELUX FS S01 Fixed Skylight Fixed, non-opening pitched-roof skylight for natural daylight and a clean low-maintenance finish. View FS S01 → VS S01 · 1140 × 700mm VELUX VS S01 Manual Opening Skylight Manual opening skylight for natural daylight plus fresh-air ventilation. View VS S01 → VSE S01 · 1140 × 700mm VELUX VSE S01 Electric Opening Skylight Electric opening skylight with powered ventilation, wireless control and rain sensor. View VSE S01 → VSS S01 · 1140 × 700mm VELUX VSS S01 Solar Opening Skylight Solar-powered opening skylight with wireless control and rain sensor. View VSS S01 →
Real Central Skylights roof work
Custom Flashing on Real Melbourne Roofs
These are genuine Central Skylights roof-installation images from our own website. They demonstrate roof-level flashing and skylight integration; the skylight sizes shown are examples and may differ from S01.
Custom Metal-Roof Flashing Real Central Skylights roof work showing skylights integrated into profiled metal roofing with broad custom flashing details.
Finished Roof Integration Completed roof work showing how skylight position, flashing and surrounding metal-roof drainage paths work together.
Pitched-Roof Skylight Installation A real roof-level installation showing skylights integrated into profiled metal roofing.
Real Central Skylights roof-work images. Final flashing design depends on the actual VELUX model and size, roof profile, pitch, water path and installation conditions.
Not sure which S01 flashing configuration you need?
Send us a clear roof photo, your VELUX model, roof profile and approximate pitch. We can help you check the likely flashing configuration before manufacture.
Made-to-Order VELUX S01 Custom Flashing
This flashing is made for compatible VELUX FS, VS, VSE and VSS S01 pitched-roof skylights in the 1140 × 700mm size. Correct flashing selection is about more than skylight size: the flashing also needs to suit the roof profile, roof pitch and water path around the opening.
Made for the Roof
- Corrugated metal roofing
- TrimDeck roofing
- Klip-Lok roofing
- Selected low-pitch configurations
- Colorbond colour options
Made for the Installer
- Prefabricated option
- Flat Pack option
- Backflash / back-tray options where required
- Supply-only for trade and homeowners
- Professional installation available for suitable Melbourne projects
Using standard VELUX flashing? Genuine VELUX EDW can suit compatible tile and conventional corrugated applications. VELUX advises EDW is not suitable for metal profiles such as TrimDeck and Klip-Lok, where a roof-specific custom flashing solution is normally required.
Match the Flashing to the Roof Profile & Pitch
VELUX FS, VS, VSE and VSS are pitched-roof skylight families intended for suitable installations from 15° to 90°. On selected roofs below 15°, an inclined custom flashing configuration may be needed so the pitched-roof skylight is presented at a suitable installation angle rather than simply following the low roof plane.
| Roof Situation | Typical Flashing Direction |
|---|---|
| Corrugated metal · 15°+ | Genuine VELUX flashing or suitable custom Colorbond flashing depending on roof profile and installation detail. |
| TrimDeck · 15°+ | Roof-profile-specific custom flashing is normally required. |
| Klip-Lok · 15°+ | Roof-profile-specific custom flashing is normally required. |
| Selected metal roofs below 15° | Inclined custom flashing may be used to raise the pitched-roof skylight to a suitable angle. |
| Unusual profile or roof junction | Send photos or a drawing before ordering so the water path and detail can be reviewed. |
Before cutting the roof opening: confirm the VELUX model and size, exact roof profile, approximate pitch and flashing arrangement.
Choose Prefabricated or Flat Pack
The S01 custom flashing can be ordered in two supply formats. Both are made for the selected roof configuration; the difference is how the flashing is supplied to the installer.
Prefabricated
Supplied assembled to reduce flashing assembly work on site.
- Ready-prepared flashing solution
- Less assembly work on the roof
- Useful for individual skylight projects
- Good for installers wanting a prepared flashing system
Flat Pack
Supplied as separate formed flashing components for assembly and installation on site by a competent installer.
- Ideal for roof plumbers and roofing contractors
- More compact for handling and transport
- Useful when ordering multiple flashing kits
- Allows experienced installers to assemble on site
| Prefabricated | Flat Pack | |
|---|---|---|
| Supply format | Pre-assembled | Separate formed components |
| Site assembly | Reduced | Required |
| Handling | Larger assembled unit | More compact for transport |
| Good fit for | Convenience and single projects | Roofers, builders and trade customers |
| Made to order | Yes | Yes |
Backflash, Back Tray & Water Management
The complete flashing arrangement needs to guide water travelling down the roof safely around the skylight and back onto the roof drainage path. Depending on the roof profile, pitch, skylight position and roof area above the opening, a backflash or back tray may be recommended.
Backflash May Be Needed When
- The roof has a low pitch
- There is significant roof area above the skylight
- The skylight is positioned well below the ridge
- The profile needs additional water diversion
- The skylight sits near a wall or roof junction
Useful Details to Send Us
- VELUX model and S01 size confirmation
- Clear roof-profile photo
- Approximate roof pitch
- Wider photo of the skylight location
- Simple drawing or plan for unusual roofs
Not sure whether you need backflash? Contact Central Skylights before manufacture. A clear roof photo and a wider view of the proposed position are usually the best starting point.
VELUX S01 Custom Flashing Specifications
| VELUX size code | S01 |
|---|---|
| Skylight size | 1140 × 700mm |
| Compatible pitched-roof models | FS S01, VS S01, VSE S01, VSS S01 |
| Roof profiles | Corrugated, TrimDeck and Klip-Lok configurations |
| Supply formats | Prefabricated or Flat Pack |
| Material / finish | Custom metal flashing with Colorbond colour options |
| Low-pitch option | Inclined custom flashing configurations available for selected projects |
| Backflash | Available where the roof detail requires it |
| Manufacture | Made to order in Melbourne |
| Pickup | Noble Park, Melbourne |
| Delivery | Melbourne delivery available |
Made-to-order product: check the VELUX model and size, roof profile, pitch, flashing format, measurements, colour and backflash requirements before manufacture. Custom-made items may not be returnable for change of mind or incorrect customer-supplied specifications.
Need the VELUX S01 Skylight as Well?
Central Skylights supplies genuine VELUX skylights, custom flashing and accessories for roofers, builders, renovators and homeowners. Buy supply-only when you already have a suitable installer, or ask about professional installation for suitable Melbourne projects.
Athelstan Richard –
The packaging and instructions were outstanding, and naturally, the product itself is also top-notch
Farrer Michael –
Easy to install
Roger Farah –
I recently bought and installed a skylight on my own. The updated mounting system made the installation process straightforward and came with a guarantee against leaks.
Kane V –
worked perfectly
Maynard R –
I really love the skylight, and the shade works perfectly!
Fergus G –
Simple and hassle-free. Thank you, Central Skylights
Orborne J –
The product is easy to install, and the service quality is good
Hubert A –
Good service, quick delivery, came in 2 days. Thanks for all
Benedict –
Works as advertised
Nolan D –
nice product