Skylight Installation in Seaford, VIC
A real Seaford skylight replacement featuring one VELUX FS M02 fixed skylight, EDW flashing, a newly formed plaster shaft and a solar honeycomb blind above the kitchen.
Seaford skylight project summary
This local Seaford project replaced an ageing and damaged kitchen skylight with a properly integrated VELUX fixed skylight. The work included removal of the old unit, supply and installation of the new skylight and flashing, internal framing, plastering and sanding, plus a solar blind for convenient light control.
Before and after: skylight replacement in Seaford
The before image shows the original wired-glass ceiling skylight above the kitchen. The completed image shows the new VELUX fixed skylight connected to the room through a newly formed and plastered shaft.
Product details
- 1 × VELUX FS M02 fixed skylight, measuring 780 × 780 mm.
- VELUX EDW M02 flashing, selected to integrate the skylight with the existing roof covering.
- White FSCD M02 solar honeycomb blind for convenient glare and daylight control.
- Fixed glazing was appropriate where natural light was required without an opening or ventilation function.
Installation details
- Removed the old damaged skylight and associated components.
- Prepared and framed the opening for the new VELUX skylight.
- Installed the FS M02 skylight and EDW flashing at roof level.
- Formed the internal light shaft, then plastered and sanded it ready for painting.
- Repointed the relevant ridge-cap area noted within the job scope.
- Installed the solar honeycomb blind to complete the daylight-control setup.
Products and services used in this project
These links explain the main product and service options relevant to this Seaford skylight replacement.
Roof and flashing details
The roof photographs show the original raised skylight and the completed lower-profile VELUX installation integrated into the existing roof.
Original roof skylight before removal.
New VELUX fixed skylight integrated with EDW flashing.
Completed roof installation shown in context.
Interior and completed project photos
These completed photographs show the new skylight above the kitchen and the plaster shaft after sanding. Painting was not part of the installation scope.
Completed kitchen skylight in its room context.
New skylight glazing and plaster shaft detail.
Daylight entering through the newly formed shaft.
Completed square shaft before painting.
Finished plastered opening viewed from the kitchen.
Plaster and sanding completed ready for paint.
How the Seaford skylight replacement was completed
Old unit removed
The damaged existing skylight and its components were removed so the new installation could begin from a properly prepared opening.
VELUX system installed
The FS M02 fixed skylight and EDW flashing were installed to suit the roof, with associated roof detailing completed as required.
Shaft and blind completed
The internal shaft was framed, plastered and sanded, followed by installation of the solar honeycomb blind.
Why this Seaford job matters
This project is a useful example of replacing an older skylight as a complete system rather than simply altering the visible ceiling opening. The roof unit, flashing and internal shaft all needed to work together.
The new fixed skylight brings clearer overhead daylight into an everyday kitchen area, while the solar honeycomb blind allows the household to reduce glare or soften the light when required.
For homeowners comparing skylight installation in Seaford, the project also demonstrates why roof type, flashing selection, shaft construction and internal finishing should be considered together during quoting.
Nearby areas we service
FAQ: skylight installation in Seaford
What type of skylight was installed on this Seaford project?
Central Skylights installed one VELUX FS M02 fixed skylight measuring 780 × 780 mm above the kitchen.
Was the existing skylight removed?
Yes. The old damaged skylight and its associated components were removed before the new VELUX system was installed.
What flashing was used for the new skylight?
The project used VELUX EDW M02 flashing, selected to suit the existing roof covering and the FS M02 skylight.
Was the internal ceiling work included?
Yes. The quoted scope included framing, plastering and sanding of the new light shaft. The completed photographs show the shaft ready for painting.
Can a blind be added to a fixed VELUX skylight?
Yes. This project included a white FSCD M02 solar honeycomb blind to provide convenient control over daylight and glare.
How much does skylight installation in Seaford cost?
The cost depends on skylight size and model, roof type, access, flashing, shaft depth, plaster work and whether an old skylight must be removed. See the Melbourne skylight installation cost guide for practical pricing information.
Planning a skylight installation in Seaford?
Send Central Skylights photos of your roof, ceiling and the room you would like to brighten. Our team can help determine the suitable VELUX skylight, flashing and installation approach for your home.