Skip to content

Real Central Skylights Project · Niddrie VIC

Skylight Installation in Niddrie

A completed Niddrie project combining an old kitchen skylight replacement with a VELUX FS C06 fixed skylight and two rigid VELUX Sun Tunnels bringing daylight into the hallway.

Job #59489Supply & installVELUX FS C062 × rigid Sun TunnelsPitched tiled roof
Completed VELUX FS C06 fixed skylight with EDW flashing on a tiled roof in Niddrie

Project overview

One home, two daylight solutions

This skylight installation in Niddrie addressed two separate areas. In the kitchen, the existing skylight was removed and replaced with a VELUX fixed skylight and a new plaster shaft. In the hallway, two rigid Sun Tunnels were installed to introduce overhead daylight through compact ceiling diffusers.

LocationNiddrie, VIC
InstalledWednesday, 7 October 2026
Kitchen skylight1 × VELUX FS C06 fixed skylight
Skylight size550 × 1180 mm
RoofPitched profiled tile roof
FlashingVELUX EDW C06
Hallway daylight2 × VELUX TWR 0K14 rigid Sun Tunnels
Internal finishFraming, plastering & sanding; painting excluded

Kitchen replacement

Before and after: replacing the old kitchen skylight

The survey photo records the existing compact ceiling skylight. The later photo shows the new deeper plaster shaft formed beneath the replacement VELUX roof skylight, with plastering and sanding completed ready for the client’s painting.

Existing kitchen skylight before replacement in Niddrie
Before
Existing kitchen skylight before removal and replacement.
New plastered skylight shaft in the Niddrie kitchen after VELUX installation
After
New skylight shaft after framing, plastering and sanding, ready for painting by the client.

Hallway daylight

Two rigid Sun Tunnels for the internal hallway

The hallway had limited direct daylight. Two 350 mm VELUX rigid Sun Tunnels were included in the job, with one 1240 mm rigid shaft extension specified where additional tube length was required.

Hallway ceiling before VELUX Sun Tunnel installation in Niddrie
Before
Hallway ceiling during the pre-installation assessment, with the proposed daylight position marked.
Completed round VELUX Sun Tunnel diffuser bringing daylight into a Niddrie hallway
After
Completed ceiling diffuser delivering overhead daylight into the hallway.

Installation journey

From roof-space assessment to finished roof work

The photographs document the real installation sequence: checking the roof cavity and intended positions, opening and framing the tiled roof, fitting the VELUX roof components, and completing the internal daylight openings.

1
Timber roof cavity inspected before skylight and Sun Tunnel installation

Roof-space assessment

Existing timber framing and services were visible in the roof cavity and were considered when identifying practical installation positions.

2
Tiled roof with proposed skylight position marked before installation

Roof position confirmed

The proposed roof position was marked on the weathered profiled tiles before the roof opening was made.

3
Roof opening and timber framing prepared for VELUX skylight installation in Niddrie

Opening and framing

Tiles were removed around the opening and new timber framing was formed to receive the replacement skylight and internal shaft.

4
Completed VELUX FS C06 fixed skylight and EDW flashing on tiled roof

FS C06 and EDW flashing

The VELUX FS C06 fixed skylight was integrated into the pitched tile roof using the matching EDW C06 flashing system.

5
Two VELUX Sun Tunnel roof collectors installed on the tiled roof in Niddrie

Two Sun Tunnel roof units

A wider roof view records the two separate Sun Tunnel roof collectors positioned along the tiled roof.

6
Plastered internal shaft beneath VELUX fixed skylight ready for painting

Internal shaft finished

The kitchen shaft was framed, plastered and sanded. Painting was outside the Central Skylights scope for this job.

Products & scope

VELUX products used on Job 59489

VELUX FS C06 fixed skylight

  • 1 × FS C06 2004AD
  • 550 × 1180 mm
  • Fixed skylight for pitched roof application
  • Matching EDW C06 flashing
  • Existing kitchen skylight removed and disposed of

View VELUX FS fixed skylights →

VELUX rigid Sun Tunnels

  • 2 × TWR 0K14 2010
  • 350 mm diameter
  • Rigid shaft, listed at 1650 mm
  • 1 × ZTR 0K14 0124 extension, 1240 mm
  • Installed to hallway areas

Internal finishing & blind

  • Framing and plastering to skylight shaft
  • Roof cavity allowance listed up to 1500 mm
  • Sanding included; painting excluded
  • 1 × FSCD C06 1045KWL solar honeycomb blind included in the job scope

Project gallery

Roof, Sun Tunnel and interior details

Selected photographs are included because they explain the work clearly rather than simply increasing gallery size.

Why the combination works

Different daylight products for different spaces

The kitchen had an existing roof-light opening and was suited to a full-size VELUX fixed skylight replacement. The hallway needed compact daylight points rather than large plaster shafts, so rigid Sun Tunnels provided a separate solution for those internal areas.

For homeowners comparing options, Central Skylights can assess whether a room is better suited to a full skylight, a Sun Tunnel, or a combination of both.

Project scope at a glance

  • Removal and disposal of the old kitchen skylight
  • Supply and installation of one VELUX FS C06 fixed skylight
  • VELUX EDW C06 flashing for the tiled roof
  • Framing, plastering and sanding of the kitchen shaft
  • Two rigid VELUX TWR 350 mm Sun Tunnels
  • One rigid shaft extension where required
  • Solar honeycomb blind included in the documented scope

Nearby areas

Skylight installation around Niddrie

Central Skylights also works across nearby north-west Melbourne suburbs.

Airport WestEssendon NorthEssendon WestKeilor EastStrathmoreEssendonAvondale Heights

Project FAQ

Skylight installation Niddrie: common questions

What skylight replaced the old kitchen skylight?

The documented replacement was one VELUX FS C06 2004AD fixed skylight, sized 550 × 1180 mm, with a matching VELUX EDW C06 flashing system.

Were Sun Tunnels installed as part of the same project?

Yes. The hallway scope included two VELUX TWR 0K14 rigid Sun Tunnels with 350 mm diameter shafts, plus one 1240 mm ZTR rigid extension.

Was the internal kitchen shaft plastered?

Yes. Framing, plastering and sanding were included. Painting was excluded and left for the client.

What roof type is shown in the project photographs?

The photographs show a pitched profiled tile roof. The exact tile material/profile and roof pitch are not confirmed by the project documents, so they are not specified more narrowly.

Can Central Skylights assess an old skylight replacement in Niddrie?

Yes. For replacement work, clear photos of the existing skylight, ceiling, roof and roof cavity where accessible help the team assess practical replacement options before quoting.

Niddrie & Melbourne

Planning a skylight replacement or a darker hallway?

Send photos for an online assessment or book a free home visit so the roof, ceiling and intended daylight positions can be reviewed.

CENTRAL SKYLIGHTS

Trade Quick Order

Order skylights and accessories directly from Central Skylights.

Prefer a full page? Open Trade Quick Order page
CENTRAL SKYLIGHTS · TRADE

Trade Quick Order

Choose a family, select your model and quantity, then add. Repeat until your order is ready.

Add a product

Choose a family to begin.

Custom flashing and backflash: tap Configure Options to choose roof profile, COLORBOND colour and any required fabrication details without leaving this order page. If the embedded form is blocked, use the original product page link.

Checkout →
CENTRAL SKYLIGHTS

Get Your Instant Skylight Quote

Build your skylight installation estimate in around one minute.

Prefer a full page? Open Instant Quote page
CENTRAL SKYLIGHTS · MELBOURNE

Plan your skylight installation

Choose your property, rooms and VELUX skylights.

Loading available skylights…

Shopping cart0
There are no products in the cart!
Continue shopping
0