Skip to content

Completed Central Skylights project · Mooroolbark, VIC

VELUX Skylight Installation in Mooroolbark, VIC

One VELUX FS M04 fixed skylight was supplied and installed above a kitchen, with Pale Eucalypt custom Colorbond flashing, a deep framed-and-plastered shaft and a matching VELUX solar honeycomb blind.

Job #565991 × VELUX FS M04780 × 980 mmSupply & installKitchen
Completed VELUX fixed skylight and plaster shaft over a Mooroolbark kitchen
Fixed daylight skylightVELUX FS M04 2004AD
Corrugated metal roofRoof covering confirmed in project photos
Custom Colorbond flashingPale Eucalypt specified for this job
Internal shaft includedFraming, plastering and sanding

Local project overview

A fixed skylight planned around an existing Mooroolbark kitchen

This skylight installation in Mooroolbark was a complete supply-and-install project rather than a product-only sale. The kitchen had a flat plaster ceiling with a substantial roof cavity above it, so the job required roof set-out, a framed internal shaft and plaster finishing as well as the skylight and roof flashing.

Pre-installation photos also show existing ductwork and electrical services in the roof cavity. The documented scope required these services to be relocated by the customer before the plaster stage, allowing the skylight shaft to be formed through the planned ceiling area.

The finished photographs show a wide, clean plaster opening below the M04 skylight, creating a new overhead daylight source over the kitchen.

Before & completed

From a standard kitchen ceiling to a finished skylight shaft

The photos were taken from different positions, so they are shown side by side rather than as an artificial comparison slider.

Kitchen ceiling before VELUX skylight installation in Mooroolbark
Before

Existing kitchen ceiling

The original flat plaster ceiling before the new roof-to-ceiling skylight shaft was formed.

Completed kitchen with VELUX fixed skylight installation in Mooroolbark
Completed

New overhead daylight opening

The completed kitchen view shows the finished plaster shaft and fixed VELUX skylight above the work area.

Roof cavity inspection showing timber framing and an existing duct near the planned skylight shaft

Planning the shaft

Existing roof-cavity services had to be considered before plastering

The roof-cavity inspection shows timber framing, insulation, wiring and a flexible duct in the area above the kitchen.

This matters because the invoice specifically records that ducts, pipes and electrical wires were to be relocated by the customer before the plaster stage. The final shaft therefore depended on coordinating the skylight position with both the roof structure and existing services.

Flat plaster ceiling with a deep roof cavity.
Documented framing and plastering allowance up to 1300 mm roof-cavity depth.
Existing services identified before the internal shaft was completed.
Final painting was left to the customer.

Products installed

VELUX FS M04 fixed skylight with solar honeycomb blind

Skylight

VELUX FS M04 2004AD

A fixed VELUX skylight was selected for this kitchen project. The documented M04 unit measures 780 × 980 mm and is part of the VELUX pitched-roof fixed skylight range.

Quantity1
Size780 × 980 mm
TypeFixed skylight
RoomKitchen

Blind

VELUX FSCD M04 1045KWL

The project also included one VELUX solar honeycomb blind matched to the M04 fixed skylight, together with installation of the blind.

Quantity1
OperationSolar
StyleHoneycomb blind
Matched sizeM04

Roof preparation & flashing

Custom Colorbond flashing integrated with the corrugated metal roof

Project photos show the roof opening cut through the existing corrugated metal sheeting, followed by the fitted VELUX unit and a broad custom flashing tray. The invoice specifies Pale Eucalypt Colorbond for the flashing.

Corrugated metal roof opening prepared for VELUX M04 skylight in Mooroolbark
Roof opening

Opening and roof structure exposed

The cut-out shows the existing corrugated roof profile, insulation and timber structure before the skylight was installed.

VELUX FS M04 skylight with Pale Eucalypt custom Colorbond flashing on corrugated metal roof
Flashing detail

Custom metal flashing around the M04

The close roof view shows the fixed skylight sitting within the custom Colorbond flashing system specified for this job.

Completed VELUX fixed skylight installed on corrugated metal roof in Mooroolbark
Completed roof

Finished exterior position

The wider roof photo records the completed skylight position on the single-storey corrugated metal roof.

Installation process

How this Mooroolbark skylight project came together

Room and cavity assessment

The kitchen ceiling, roof cavity, timber framing and existing services were inspected before the final opening was formed.

Roof opening and skylight

The corrugated roof was opened for the M04 unit and the fixed VELUX skylight was installed at the selected position.

Custom roof flashing

A Pale Eucalypt Colorbond flashing system was fitted around the skylight to suit the existing metal roof.

Shaft and internal finish

The deep internal opening was framed, plastered and sanded, with final painting left to the customer. The solar honeycomb blind was also included in the job.

Finished interior

A deep plaster shaft finished around the fixed skylight

The final close-up shows the skylight at roof level with a much wider opening at ceiling level. This creates a clean transition through the substantial roof cavity while keeping the finished kitchen ceiling neat.

The invoice allowed for framing and plastering through a roof cavity up to 1300 mm. Painting was not part of the documented scope.

Completed plastered skylight shaft with VELUX FS M04 fixed skylight and solar blind

Why Central Skylights

One team for the skylight, roof detail and internal shaft

This project shows the parts that need to work together on a complete skylight installation: room set-out, roof-cavity planning, the VELUX unit, custom metal flashing and the internal plaster shaft.

For homeowners comparing a VELUX skylight installer near Mooroolbark, real completed-project photos are useful because they show both the roof work and the finished room rather than only the product itself.

Nearby eastern suburbs

Skylight installation around Mooroolbark

CroydonKilsythLilydaleMontroseBayswater NorthChirnside ParkRingwood East

Project FAQ

Questions about this Mooroolbark skylight installation

What skylight was installed on this Mooroolbark project?

One VELUX FS M04 2004AD fixed skylight was supplied and installed. The documented skylight size is 780 × 980 mm.

Was a blind included?

Yes. The job included one VELUX FSCD M04 1045KWL solar honeycomb blind matched to the M04 fixed skylight, plus blind installation.

What type of roof was the skylight installed on?

The project photos show a pitched corrugated metal roof. The job used custom Colorbond flashing specified in Pale Eucalypt.

Was the internal skylight shaft included?

Yes. The documented scope included framing, plastering and sanding through a roof cavity up to 1300 mm. Final painting was left to the customer.

Were there services in the roof cavity?

Yes. Project photos show ductwork and wiring in the roof cavity, and the job notes required the customer to relocate ducts, pipes and electrical wires before plastering.

How can I price a similar fixed skylight installation in Mooroolbark?

Every roof and ceiling layout is different. Send clear room, ceiling and roof photos through the online quote form, or book a home visit so the position, roof and shaft can be assessed for your property.

Planning a skylight project?

Need a skylight installation in Mooroolbark?

Tell Central Skylights about the room you want to brighten, your roof type and the finish you need. Photos of the room, ceiling and roof are a useful starting point for assessing a similar VELUX installation.

Shopping cart0
There are no products in the cart!
Continue shopping
0